|
Pressure Balanced Valve Body with Integral Diverter
- American Standard Pressure Balanced Valve Body with Integral Diverter
- Temperature Control Valve With Integral Diverter
- Screwdriver Stops
- Female Thread I.P.S. Inlets/Outlets
- LESS Handle And Trim
- Mixing Valve Cycles From "Off" to "Cold" to "Warm" to "Hot"
- Hot Limit Safety Stop
- 47mm Cermaic Disc Valve Cartridge with Back-to-Back Capability
- Solid Brass Valve Body with Nominal 1/2" Inlets/Outlets
- 1-1/2" to 3-1/4" Roughing-In Depth(Meaused From Center of Inlet to Finished Wall Surface)
- Plaster Guard can be Used as Thin-Wall Support Plate
- Trim Must be Ordered Separately
|